10

2017

-

04

The use of paint room should pay attention to matters

Source:


Simply put, the paint room is generally used to spray and baking paint, therefore, the most accurate description of the paint room should be "spray paint room". It is widely used in automobile, machinery, hardware, furniture, FRP products, chemical equipment and other industries of the workpiece surface painting, paint construction operations. In order to ensure the safety of the use of the paint room, the following issues should be paid attention to when using: 1. No flammable and explosive materials shall be stored in the paint room. 2. After each operation, the paint booth must be cleaned up. Any cover used to cover up objects that have not been sprayed must be cleaned up. It is recommended to clean the ground net and its floor with a vacuum cleaner once a week. 3. Electricity

Simply put, the paint room is generally used to spray and baking paint, therefore, the most accurate description of the paint room should be "spray paint room". It is widely used in automobile, machinery, hardware, furniture, FRP products, chemical equipment and other industries of the workpiece surface painting, paint construction operations. In order to ensure the safety of the use of the paint room, the following issues should be paid attention to in use:
1. Flammable and explosive materials shall not be stored in the paint room.
2. After each operation, the paint booth must be cleaned up. Any cover used to cover up objects that have not been sprayed must be cleaned up. It is recommended to clean the ground net and its floor with a vacuum cleaner once a week.
3. The power supply voltage shall not be lower than or higher than ± 10% of the specified voltage.
4. If the burner does not catch fire once, please wait for 3 minutes and then press the red light button on the control box. If there is no fire for four consecutive times, please clear the oil accumulation in the heat exchanger, find out and eliminate the fault before starting the burner.
5, the use of diesel brands must be higher than the local night minimum temperature of 5 ℃, shall not use the cage oil, water or other impurities of diesel.
6. The paint room is only allowed to be used in an environment where there is no danger of explosion and open fire. Smoking in the room is strictly prohibited.
7. Without the approval of the manufacturer, the manufacturer shall not be responsible for all liabilities caused by unauthorized modification of the equipment.
8. The manufacturer shall not be responsible for all liability arising from the removal or tampering of protective or safety devices without authorization.
9. Do not use low boiling point solvents to clean the walls in the room.
10. When the equipment is working, someone must monitor it. After the work is completed, all switches must be reset to the shutdown position.
11. This equipment must be operated by professionals who are familiar with the operating specifications of the equipment.
In order to make the paint room work better and avoid accidents, the paint room manufacturers hope that the majority of users and friends will carefully read the product instructions and pay attention to related matters before operating the paint room.