04

2020

-

11

Introduction of water curtain machine

Source:


Water curtain machine is a kind of environmental protection equipment, which is mainly used for the treatment of coating waste gas in the coating assembly line workshop of various industries. It has the advantages of simple operation, stable use and safety. Usage and Performance

Water curtain machine is a kind of environmental protection equipment, which is mainly used for the treatment of coating waste gas in the coating assembly line workshop of various industries. It has the advantages of simple operation, stable use and safety.

Usage and Performance

The water curtain machine is mainly used for the treatment of exhaust gas (paint mist) in the product spraying workshop, providing a good working environment for everyone. Efficient and environmentally friendly water curtain machine (painting station) mainly uses water to filter the exhaust gas (paint mist) from the painting workshop, which is convenient and energy-saving. Use water to pump the exhaust gas (paint) into the drain pipe, and change the water regularly.

Working principles

The environmentally friendly water curtain machine (spray paint rack) is mainly pumped by a self-priming water pump, so that the water circulates and flows evenly to the water curtain plate. The exhaust gas (paint mist) from the spray gun is hit by the water from the water curtain machine into the pool below. The upper fan discharges a small part of the exhaust gas (paint mist) to the outside of the workshop through the exhaust pipe. There is no exhaust gas (paint fog) in the workshop, providing a good working environment for everyone.

use and maintenance

Before using an environmentally friendly water curtain machine (painting rack), please apply some butter on the fan blades, which will help you remove the paint on the fan for a long time.

It must be ensured that the fan runs forward when starting, so that the exhaust gas in the environmentally friendly water curtain machine (spray booth) can be discharged out of the workshop. If it is reversed, just change the position of the three live wires on the motor.

After the fan has been used for a period of time, the paint on the blades should be treated regularly. During the processing, please be careful not to deform the blades, which will make the blades rotate unevenly and shorten the service life of the fan. The water in the drain pipe should not rise too much, as this can easily block the pump. The pump cannot be drained. If you find that you cannot pump water, cut off the power immediately.